JDSU NT850 Uživatelská příručka stáhnout pdf (Strana 60)

Chapter 4 Performing Cabling Tests

Performing Cable Tests

44 LanScaperPRO Network Tester User’s Guide

pins shorted together, lines connect all the

shorted pins. If there are multiple shorts, the hori-

zontal lines connecting the pins are separate.

– Test Result Area: Displays the results of the

test. Possible values are PASS and FAIL.

– Remote ID Area: Displays the ID found for the

remote. If no remote is found, No Remote is

displayed.

For more information, see “Interpreting Cable Test

Results” on page 70 in Chapter 6.

Once the test is complete, you can run another test

or use the QUIT key to exit Cable Test mode and

return to the previous menu.

NOTE

Partial and erroneous results will be displayed if a

cable is removed or connected while the test is in pro-

cess.

NOTE

Any patch cables used to connect the tester and

remote to a cable run must be short compared to the

cable run for accurate open and split pair indication (no

more than 10% of the total run length or 3 feet, which-

ever is less). A cable must be at least 4 feet long for a

single-ended test to work properly.

LanScaperPRO_User_Guide.book Page 44 Friday, January 25, 2008 1:14 PM

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 105 106

Žádné komentáře

JDSU NT850 Uživatelská příručka Strana 60